Rbr Glove-Single-0-11in-Red-SZ:10-1000V

• Class 0 Rubber Glove
• Electrical Rubber Glove
• Arc Flash Safety
• Arc Flash PPE
• NFPA 70E
• CSA Z462
• ASTM D120
• OSHA 1910.269

OEL Class 0 (1,000v) low voltage industrial rubber insulating gloves provide the best-in-class electrical protection. The Class 0 glove offers a comfortable design in an ergonomically friendly hand-at-a-natural-rest shapeless hand fatigue from non-splayed fingers and generously flared cuff allows room for clothing and improves ventilation. The OEL Class 0 Rubber Insulating gloves case-hardened finish provides a smoother surface for easy donning and doffing.

Rubber Glove Sizing

To find the appropriate glove size, use a tape measure around the knuckles of the dominant hand. The inch measurement of your hand should correspond directly to the numbered sizes of the glove.

• 6.9” or less SIZE 7
• 7”-8.5” SIZE 8
• 8.6”-9.5” SIZE 9
• 9.6”-10.5” SIZE 10
• 10.6”-11.5” SIZE 11
• 11.6”-12” SIZE 12

OEL Rubber Glove Warranty

All necessary company safety practices for use of rubber products should be followed and assigned per company/corporation safety policy/program. OEL Worldwide Industries does not assume liability for the improper care and/or use of rubber products. Visual inspections and routine testing should be performed per necessary standards.

OEL Worldwide Industries warranties follow ASTM D120. It reads: 12.1 The manufacturer or supplier shall replace, without charge to the purchaser, unused gloves which, at any time within a period of nine (9) months from the date of initial delivery of the shipment to the purchaser or his designee, fail to pass the tests in this specification. This guarantee will be binding on the manufacturer or supplier only if the gloves have been properly stored and have not been subjected to more than an original acceptance test and one retest. 12.2 Any acceptance test made by the purchaser or the purchaser’s designee shall be performed within the first two (2) months of the guarantee period unless otherwise specified. NOTE 3 — Proper storage means that gloves are stored right side out, not distorted, and not stored directly above or in proximity to steam pipes, radiators, or other sources of artificial heat, or exposed to direct sunlight or other sources of ozone. It is desirable that the ambient storage temperature shall not exceed 35°C (95°F).